SEAWAYMAN
Professional Marine Engineering Tools · www.seawayman.com
TOWING CAPABILITY ASSESSMENT
DNVGL-ST-N001 / ND-0030 · STAG 2020
Printed: 17 Nov 2026
Towing Assessment
Towing Capability Assessment
STALL methodology — DNVGL-ST-N001 / ND-0030 · DNV-RP-H103 · STAG 2020
General
Used in towing-efficiency formula; capped at 45 m
Main Engine Power
≈ 4474 kW · Estimated BP ≈ 72.0 te (factor 0.012 for AHTS)
Bollard Pull (per BP Certificate)
100% MCR, instantaneous — reference only
Sustained certified value — primary value used in checks. Set to 0 to use BHP estimate as fallback.
Towing Winch & Wire
1st layer on drum
Minimum Breaking Load of tow wire
Connecting Hardware
Working Load Limit of connecting hardware
General
Reference only — not used directly in required BP calculation
Wind Exposure (above waterline)
Transverse area of hull + superstructure above waterline
1.0 low freeboard · 1.1–1.2 up to 20 m · 1.3–1.5 tall superstructure
0.5 cylindrical · 1.0 flat-sided · 1.1–1.3 mixed · 1.5 lattice
Current & Wave Exposure
Auto = B × T. Overwrite with actual sectional area if known.
1.0 barge/blunt · 0.7 ship moderate bow · 0.5 fine/raked bow
Sets DNVGL-ST-N001/ND-0030 defaults below. Override with project metocean data if available.
Default 3.0 per STAG 2020 (MBL ≥ SF × continuous BP)
Ready to assess
Enter tug, vessel and environmental data, then click Run Assessment.